SP-90 Silicone Lubricant Dry Film
Action Can Ltd
SP-90 is an aerosol silicone lubricant formulated as a dry film for industrial use on steel, plastic, glass, rubber, and wood surfaces. The product is extremely flammable and pressurized. Keep away from heat sources and do not spray on open flames. Use only in well-ventilated areas.
Hazard Pictograms
ghs02
ghs09-gup63148-62-9,74-98-6,106-97-8,75-28-5
English
GHS/CLP
11 February 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Extremely flammable aerosol that may ignite from heat, sparks, or open flames
- Pressurized container may burst if heated above 50°C (122°F)
- Releases toxic combustion fumes including carbon monoxide and nitrogen oxides when exposed to fire
- Low acute toxicity with low toxicity to aquatic organisms
First Aid Quick Guide
Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Seek medical attention if symptoms persist.
Wash skin thoroughly with soap and water. Obtain medical attention if symptoms develop.
Move to fresh air immediately. Seek medical attention if breathing problems occur or symptoms persist.
This is an unlikely exposure route. Treat symptomatically and seek medical attention if needed.
Protection Needed
No personal respiratory protective equipment normally required. Provide adequate general ventilation in the work area.
Not normally required. Wear suitable gloves if prolonged skin contact is anticipated.
Not normally required under typical use conditions.
Protective clothing to avoid splashing is recommended when handling.
Physical Properties
Safe Handling
- Keep away from heat, hot surfaces, sparks, open flames and ignition sources
- Do not spray on open flames or incandescent materials
- Do not pierce or burn the container, even after use
- Never let the container touch battery terminals or electrical sources
- Use only in well-ventilated areas to prevent vapor accumulation
- Do not mix with other chemicals or strong oxidizing agents
Store in original container in a cool, dry, well-ventilated place. Protect from direct sunlight and do not expose to temperatures exceeding 50°C (122°F). Keep containers tightly closed.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.