SEAHAWK GRAY
THE SHERWIN-WILLIAMS COMPANY
Seahawk Gray is a highly flammable paint product containing xylene, n-butyl acetate, and 1-methoxy-2-propanol acetate. The product poses inhalation and skin contact hazards with potential for vapor-related drowsiness and dizziness. Repeated skin exposure may cause dryness or cracking, and certain sensitive individuals may experience delayed allergic reactions.
Hazard Pictograms
ghs02
ghs071330-20-7,123-86-4,108-65-6,41556-26-7,13463-67-7
English
GHS/CLP
12 June 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- Highly flammable liquid and vapor - keep away from heat, sparks, and open flames
- Harmful if inhaled - may cause drowsiness, dizziness, and nervous system depression at high concentrations
- Causes skin irritation with potential for allergic sensitization in susceptible individuals
- Repeated exposure may cause skin dryness or cracking
- May produce allergic respiratory reactions with delayed onset several hours after exposure
First Aid Quick Guide
Remove contact lenses and rinse with clean water for at least 10 minutes while holding eyelids open. Seek immediate medical attention.
Remove contaminated clothing. Wash skin thoroughly with soap and water or recognized skin cleanser. Do not use solvents or thinners. Launder clothes before reuse.
Move to fresh air immediately. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration and obtain medical attention.
Rinse mouth with water if conscious. Do not induce vomiting. Seek immediate medical attention. Keep at rest.
Protection Needed
When overspray is present, wear a positive pressure air-supplied respirator. For spray application, use EN 149 vapor/particulate respirator with A2-P2 filter. During sanding or abrading, wear EN 143 P2 dust/mist respirator.
Wear gloves recommended by supplier for protection against materials listed in Section 3. For prolonged handling, use multilayer laminated gloves tested to EN 374-3.
Wear safety spectacles with unperforated sideshields.
Use barrier cream on exposed skin. Wear protective clothing to prevent contact with the product.
Physical Properties
Safe Handling
- Use only with adequate ventilation to prevent flammable vapor accumulation
- Prevent creation of flammable or explosive concentrations of vapor in air
- Keep away from heat, sparks, open flames, and all ignition sources
- Use approved bonding and grounding procedures during transfer operations
- Wash hands thoroughly after use and keep out of reach of children
Keep container closed when not in use. Store in original containers with complete labeling. Transfer only to approved containers suitable for flammable liquids. Keep out of reach of children and away from heat, sparks, and open flame sources.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.