SCAVTREAT 1031
Clariant Oil Services UK Ltd
An aqueous hydrogen sulfide scavenger solution containing 30-60% hexahydro-1,3,5-trimethyl-1,3,5-triazine. This corrosive chemical causes severe skin and eye damage and may trigger allergic skin reactions. Safe handling requires well-ventilated work areas, proper protective equipment, and careful storage away from oxidizing agents and acids.
Hazard Pictograms
ghs08
ghs05
ghs07108-74-7
English
GHS/CLP
14 September 2015
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Causes severe skin burns and eye damage upon contact
- May trigger allergic skin sensitization reactions
- Harmful if ingested with systemic toxicity concerns
- Risk of organ damage from prolonged or repeated exposure
- Releases hazardous nitrogen oxides and formaldehyde vapors in fire conditions
First Aid Quick Guide
Rinse immediately with plenty of water for several minutes. Remove contact lenses if present and easy to remove, then continue rinsing. Seek medical advice promptly.
Flush affected skin immediately with soap and plenty of water. Remove all contaminated clothing. If irritation persists, call a physician immediately.
Move to fresh air immediately. Seek medical attention if breathing difficulty develops.
Rinse mouth with water. Do not induce vomiting. Seek immediate medical attention.
Protection Needed
Wear respiratory protection with full mask and filter K if ventilation is inadequate
Use PVC disposable gloves for hand protection during handling
Wear safety goggles for splash protection
Wear suitable protective clothing to prevent contact and potential splashing
Physical Properties
Safe Handling
- Maintain well-ventilated work areas during handling and use
- Avoid all contact with skin and eyes
- Keep away from sources of ignition
- Store only in original containers with tight seals
- Prevent spills from entering soil, waterways, or drainage systems
Keep containers tightly closed in a cool, well-ventilated place. Store at temperatures between 5 to 40°C. Maintain for a maximum of 6 months. Do not store with strong oxidizing agents or acids.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.