KRYLEX KR386 ANAEROBIC RETAINER
Chemence Ltd
An anaerobic retainer adhesive based on methacrylate compounds used for bonding and sealing threaded fasteners. This product poses hazards through skin irritation, serious eye damage, and respiratory irritation. Avoid direct contact and ensure adequate ventilation during handling.
Hazard Pictograms
ghs07
ghs0527813-02-1,79-10-7,15625-89-5,80-15-9,99-97-8,114-83-0
English
GHS/CLP
14 April 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Causes serious eye damage with potential for permanent corneal burns
- Causes skin irritation and may trigger allergic skin reactions
- May cause respiratory irritation, particularly when vapor or mist is generated
- Harmful by inhalation
- Contains sensitizing substances that may produce allergic reactions on skin contact
First Aid Quick Guide
Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination immediately.
Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water. Seek medical attention if irritation persists.
Remove casualty from exposure to fresh air, ensuring personal safety. Seek medical attention if symptoms develop.
Do not induce vomiting. Wash out mouth with water. If conscious, give half a litre of water to drink. Consult a doctor immediately.
Protection Needed
Use self-contained breathing apparatus or gas/vapor filter (type A for organic vapours EN141) in case of emergency or when mist generation occurs
Wear neoprene or nitrile gloves. Do not use PVC gloves as they absorb methacrylates
Safety glasses with side-shields required. Ensure eye bath equipment is available on premises
Wear protective clothing to prevent splashing and contact with skin
Physical Properties
Safe Handling
- Avoid direct contact with skin and eyes at all times
- Ensure sufficient ventilation throughout the work area
- Do not handle in confined spaces without proper air circulation
- Avoid creating mists or aerosols during application
- Keep container tightly closed when not in use
Store in cool, well-ventilated area away from sources of ignition and direct sunlight. Keep container tightly closed in original packaging only.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.