Paratexin SOT
Penreco
Paratexin SOT is a preservative blend used in personal care formulations, containing 2-phenoxyethanol as its primary active ingredient. This liquid preparation is harmful if swallowed and causes serious eye irritation. Proper ventilation and eye protection are essential when handling this product.
Hazard Pictograms
ghs07122-99-6,65-85-0,520-45-6
English
GHS/CLP
15 November 2012
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- Harmful if swallowed (Acute Tox. 4, H302)
- Causes serious eye irritation (Eye Irrit. 2, H319)
- Can cause skin irritation with prolonged contact
- Vapors may be hazardous when inhaled
First Aid Quick Guide
Remove contact lenses if present. Rinse cautiously with water for several minutes. Continue rinsing for at least 15 minutes and seek medical attention if irritation persists.
Immediately rinse with water and remove contaminated clothing. If skin irritation continues after washing, consult a doctor.
Move the affected person to fresh air immediately. Provide rest, warmth, and general first aid measures. Seek medical attention if symptoms develop.
Rinse mouth thoroughly. Give large amounts of water or milk. If vomiting occurs, keep head low to prevent aspiration. Never give anything to an unconscious person. Seek immediate medical attention.
Protection Needed
Suitable respiratory protective device recommended. Use NIOSH or European Standard EN 149 approved respirator when aerosols or vapors may be present.
Wear protective gloves meeting DIN/EN 374 standards. Suitable materials include neoprene, nitrile, polyethylene, or PVC. Gloves must be impermeable and resistant to the product.
Safety glasses or face shield meeting EN 166 standard when pouring or handling the product.
Wear protective work clothing and a fully protective suit to prevent splashing and skin contact.
Physical Properties
Safe Handling
- Ensure good ventilation or exhaustion at the workplace
- Prevent formation of aerosols during handling
- Avoid direct contact with eyes and skin
- Observe standard safety precautions for chemical handling
- Wash hands thoroughly after handling and before breaks
Keep in cool, dry, ventilated storage in closed containers. Store away from oxidizing agents. Keep container tightly sealed to prevent moisture absorption.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.