Nissan L-248 Coolant Premixed
ARTECO N.V
Nissan L-248 is a premixed antifreeze/coolant containing ethylene glycol that can damage organs through prolonged or repeated exposure. The product is generally low hazard for acute exposure via skin and eye contact, but ingestion and chronic inhalation require careful handling and proper ventilation.
Hazard Pictograms
ghs08107-21-1,532-32-1
English
GHS/CLP
27 March 2015
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- May cause organ damage (kidney) through prolonged or repeated exposure
- Harmful if swallowed
- May cause serious eye irritation
- Contains ethylene glycol which can accumulate in brain and kidneys
First Aid Quick Guide
Remove contact lenses if worn and flush eyes with water. No specific medical treatment required.
Wash with soap and water. Remove contaminated clothing and shoes. No specific treatment needed unless irritation persists.
Move to fresh air if exposed to excessive vapors. Seek medical attention if coughing or respiratory discomfort occurs.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Protection Needed
Not normally required. Use air-purifying respirator for organic vapors if airborne concentrations exceed occupational exposure limits.
Suggested protective glove materials include natural rubber, neoprene, nitrile rubber, or PVC when splashing is possible.
No special eye protection normally required. Wear safety glasses with side shields if splashing is possible.
No special protective clothing normally required. Select protective clothing if splashing is possible.
Physical Properties
Safe Handling
- Avoid contact with skin and eyes; do not taste or swallow
- Do not breathe vapors or fumes; use in well-ventilated areas
- Avoid contaminating soil, drainage systems, and bodies of water
- Wash thoroughly after handling; keep out of reach of children
- Minimize electrostatic charge through bonding and grounding during container filling and transfer operations
Store in original container away from incompatible materials. Container is not designed to contain pressure. Do not pressurize, cut, weld, or expose to heat, flame, sparks, or ignition sources.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.