MP10
Premiere Products
MP10 is a blue liquid cleaning agent with alkaline properties (pH 12.0). The product poses eye and skin irritation hazards and may trigger allergic reactions due to fragrance content. Protective equipment and proper handling procedures are essential to minimize exposure risks.
Hazard Pictograms
ghs07
ghs05112-34-5,85536-14-7,1310-73-2,
English
GHS/CLP
1 June 2015
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Causes serious eye damage with potential for permanent vision loss
- Causes skin irritation upon direct contact
- May produce allergic reactions in sensitive individuals due to perfume content
- Contains corrosive ingredients including sodium hydroxide and sulphuric acid
First Aid Quick Guide
Remove contact lenses if present. Rinse cautiously with water for at least 15 minutes. Seek immediate medical attention.
Remove contaminated clothing immediately. Wash affected area with soap and water thoroughly. Get medical attention if irritation persists.
Move to fresh air immediately. Get medical attention if discomfort, coughing, or breathing difficulty develops.
Rinse mouth thoroughly with water. Drink plenty of water but do not induce vomiting. Seek immediate medical attention.
Protection Needed
No specific respiratory protection required under normal use conditions.
Wear chemical-resistant, impervious gloves such as nitrile or rubber when handling.
Wear safety glasses or eye protection to prevent splashing into eyes.
Wear protective clothing to prevent splashing or contamination of skin. Remove and wash contaminated clothing before reuse.
Physical Properties
Safe Handling
- Follow manufacturer's recommendations for use and dilution
- Avoid contact with skin, eyes, and clothing during handling
- Use only in well-ventilated areas to minimise inhalation exposure
- Do not mix with strong acids or other chemicals
- Keep container tightly closed when not in use
Store in original, tightly-closed containers in a dry, cool, well-ventilated location. Keep away from direct sunlight and high temperatures. Store as chemical storage class material.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.