LOCTITE SF 7414 known as LOCTITE 7414 50ML AU
Henkel Ltd
LOCTITE SF 7414 is a blue, flammable liquid adhesive used for tamper-proofing applications. It contains xylene and ethylbenzene solvents, presenting risks of skin and eye irritation, respiratory effects, and potential allergic reactions with prolonged contact. Proper ventilation and protective equipment are essential during handling.
Hazard Pictograms
ghs07
ghs021330-20-7,100-41-4,162627-17-0
English
GHS/CLP
5 September 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- Flammable liquid and vapor with flash point of 30°C
- Causes skin irritation and may trigger allergic reactions
- Harmful by inhalation and skin contact
- May cause respiratory and eye irritation with prolonged or repeated exposure
- Toxic to aquatic organisms
First Aid Quick Guide
Rinse immediately with plenty of running water for at least 10 minutes. Seek medical attention from a specialist.
Rinse with running water and soap. Obtain medical attention if irritation persists.
Move to fresh air. If symptoms persist, seek medical advice.
Rinse mouth, drink 1-2 glasses of water. Do not induce vomiting. Consult a doctor immediately.
Protection Needed
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapor cartridge (Filter type A) should be worn if used in poorly ventilated areas.
Wear chemical-resistant nitrile rubber protective gloves (NBR, at least 0.4 mm thickness) according to EN 374 standards.
Wear safety glasses with sideshields or chemical safety goggles if there is a risk of splashing.
Wear suitable protective clothing to prevent splashing.
Physical Properties
Safe Handling
- Use only in well-ventilated areas or with adequate mechanical extraction
- Avoid direct skin and eye contact
- Avoid prolonged or repeated skin contact to minimize sensitization risk
- Keep away from heat, hot surfaces, sparks, open flames and ignition sources
- Do not eat, drink or smoke while working with the product
Store in original containers at 8-21°C (46.4-69.8°F). Do not return residual materials to containers as this may reduce bulk product shelf life.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.