LOCTITE LB 8014 FOODGRADE ANTI -SEIZE known as LOCTITE Food Grade Anti -Seize
Henkel Adhesives
A white paste anti-seize lubricant containing calcium dihydroxide formulated for food-grade applications. The product causes skin irritation and serious eye damage upon contact. Avoid direct contact with skin and eyes, and ensure adequate ventilation when handling to prevent inhalation exposure.
Hazard Pictograms
ghs10-aa1
ghs05
ghs071305-62-0,1314-13-2
English
GHS/CLP
20 October 2016
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Causes serious eye damage with risk of irreversible effects
- Causes skin irritation with redness and inflammation
- May cause respiratory irritation if inhaled in poorly ventilated areas
- Harmful to aquatic life with long-lasting environmental effects
First Aid Quick Guide
Rinse immediately with plenty of running water for at least 10 minutes. Remove contact lenses if present and easy to do. Seek immediate medical attention.
Rinse with running water and soap. Wash affected area thoroughly. Seek medical advice if irritation persists.
Move to fresh air immediately. If symptoms persist, seek medical advice.
Rinse mouth thoroughly. Drink 1-2 glasses of water. Do not induce vomiting. Seek medical advice immediately.
Protection Needed
Ensure adequate ventilation. Wear an approved mask or respirator fitted with an organic vapor cartridge (Filter type A per EN 14387) if used in poorly ventilated areas.
Wear chemical-resistant nitrile rubber gloves with minimum 0.4mm thickness. For short-term contact, protection index 2 recommended (>30 minutes permeation time). For extended contact, protection index 6 recommended (>480 minutes permeation time).
Wear safety glasses with side shields or chemical safety goggles to protect against splashing. Protective eyewear must conform to EN 166 standard.
Wear suitable protective clothing. Protective garments must conform to EN 14605 for liquid splashes or EN 13982 for dust protection to prevent contamination.
Physical Properties
Safe Handling
- Avoid direct contact with skin and eyes during application
- Do not eat, drink, or smoke while working with the product
- Wash hands thoroughly before breaks and after finishing work
- Use in well-ventilated areas to minimize inhalation exposure
- Prevent accidental release into drains or surface water
Store in original containers at 8-21°C (46.4-69.8°F). Do not return residual materials to original containers as contamination may reduce product shelf life. Keep containers tightly sealed.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.