JLA ULTRA Laundry Destainer Powder
JLA Limited
JLA ULTRA Laundry Destainer Powder is a powdered destaining detergent containing sodium percarbonate (50-70%). The product presents acute toxicity and eye damage hazards. It should be handled with care using appropriate protective equipment and stored in cool, well-ventilated conditions.
Hazard Pictograms
ghs05
ghs07English
GHS/CLP
12 May 2015
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Causes serious eye damage requiring immediate medical attention
- Harmful if swallowed, can cause mouth and throat soreness
- May emit toxic fumes during combustion
- Dust generation poses inhalation risks
- Reactive with strong oxidising agents and acids
First Aid Quick Guide
Bathe the eye with running water for at least 15 minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek immediate medical attention.
Wash immediately with plenty of soap and water. Mild irritation may occur at the contact site.
Remove casualty from exposure ensuring personal safety. Move to fresh air and consult a doctor if symptoms develop.
Rinse mouth with water immediately. Do not induce vomiting. Give half a litre of water to drink if conscious and transfer to hospital as soon as possible.
Protection Needed
Use respiratory protective device with particle filter when handling or when dust is generated.
Wear protective gloves (suitable materials include nitrile or rubber) when handling the product.
Wear safety glasses and ensure an eye bath is available in the work area.
Wear protective clothing to prevent contact with the powder and potential splashing.
Physical Properties
Safe Handling
- Ensure adequate ventilation in the work area
- Avoid creating or spreading dust in the air
- Prevent direct contact with the substance
- Do not eat, drink or smoke when handling the product
- Wash hands thoroughly after handling
Store in original packaging only, in a cool, well-ventilated area. Keep container tightly closed. Avoid exposure to heat and incompatible materials such as strong oxidising agents and strong acids.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.