Grey Primer
Aerosol Solutions Limited
A pressurized aerosol paint primer containing acetone (30-60%) and aliphatic hydrocarbons. Extremely flammable with a high risk of narcotic effects from vapor inhalation. Should be used only in well-ventilated areas away from heat, sparks, and open flames.
Hazard Pictograms
ghs02
ghs0767-64-1,64742-48-9,106-97-8,75-28-5,64742-82-1,7779-90-0
English
GHS/CLP
27 September 2010
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- Extremely flammable liquid and vapor in aerosol form
- Causes serious eye irritation and may harm aquatic organisms
- Vapor inhalation may cause drowsiness, dizziness, headache, and fatigue
- Repeated exposure may cause skin dryness and cracking
- Aerosol containers can explode when heated or exposed to high temperatures
First Aid Quick Guide
Immediately flush with plenty of water for up to 15 minutes. Remove contact lenses if present. Continue rinsing for at least 15 minutes and seek medical attention.
Wash contaminated skin promptly with soap and mild detergent and water. Remove soaked clothing and wash as above.
Move to fresh air immediately and keep at rest. Perform artificial respiration if breathing has stopped. Seek prompt medical attention.
Rinse mouth immediately and provide fresh air. Do not induce vomiting. Obtain medical attention.
Protection Needed
Use suitable respirator if ventilation is inadequate to control vapor and aerosol mist exposure.
For prolonged or repeated contact, wear suitable protective gloves. Consult glove supplier for breakthrough times with aerosol propellants.
Wear approved chemical safety goggles where eye contact with spray is reasonably probable.
Wear protective clothing and avoid skin contact. Use appropriate hand lotion after handling to prevent skin drying and cracking.
Physical Properties
Safe Handling
- Keep away from heat, sparks, and open flames at all times
- Eliminate all sources of ignition before handling
- Do not spray near naked flames or incandescent materials
- Use only in well-ventilated areas to minimize vapor exposure
- Avoid inhalation of spray mist and vapors
Store in original pressurized container at moderate temperatures in a dry, well-ventilated area. Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn containers even after use.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.