Background
Safety Data Sheet

GEOCEL TRADE MATE DECORATORS CAULK

Geocel Limited

Geocel Trade Mate Decorators Caulk is a highly viscous paste-based sealant formulated for decorative applications. This product is not classified as dangerous under EU regulations, with minimal hazards requiring basic handling precautions such as skin and eye protection during application.

Language

English

Regulation

CHIP, 67/548/EEC

Revision Date

25 August 2010

Request This SDS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Safety Information

Key safety data extracted from the official Safety Data Sheet

Key Hazards

  • May cause mild skin irritation at the site of contact
  • May cause eye irritation and redness
  • May cause throat irritation if ingested
  • Emits carbon dioxide and carbon monoxide if heated or burned
  • Not bioaccumulative but slightly persistent in the environment

First Aid Quick Guide

Eye Contact

Bathe the affected eye with running water for at least 15 minutes. Ensure an eyewash station is readily available in the work area.

Skin Contact

Wash the affected area immediately with plenty of soap and water to remove the product completely.

Inhalation

Move the exposed person to fresh air immediately, ensuring your own safety during the rescue.

Ingestion

Rinse the mouth thoroughly with water. Do not induce vomiting. Seek medical attention promptly.

Protection Needed

Respiratory

Respiratory protection is not normally required under standard application conditions. Use respiratory protection if excessive mist or vapors are generated.

Hands

Wear protective gloves, such as nitrile or latex, when handling the product to prevent skin contact.

Eyes

Wear safety glasses or a face shield when applying or handling to protect against splashes and contact.

Skin/Body

Wear protective clothing to prevent product splashing onto exposed skin during application and handling.

Physical Properties

AppearanceColored paste available in various colors
OdorSweet-smelling
pH7 - 8
Flash PointNot applicable
Boiling PointApproximately 100°C

Safe Handling

Handling Precautions
  • Ensure adequate ventilation of the work area during application
  • Avoid contact with strong oxidizing agents
  • Keep containers tightly closed when not in use
  • Do not discharge spilled material into drains or water sources
  • Absorb spills into dry earth or sand and transfer to labeled containers for proper disposal
Storage

Store in original, sealed containers in a cool, well-ventilated area away from direct sunlight and extreme temperatures.

Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.

Manage All Your Safety Data Sheets with Sevron

Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.

2.5M+
Safety Data Sheets
Access our comprehensive database
AI-Powered
Auto Updates
Never miss a revision again
100%
Compliance Ready
Meet regulatory requirements

Manage safety with confidence – supported by Sevron

FIND OUT MORE