Background
Safety Data Sheet

Eudragit s 100

Evonik Treibacher GmbH

Eudragit S 100 is an enteric polymer designed for pharmaceutical coating applications. The substance presents minimal acute hazards under normal handling conditions but requires appropriate protective measures to prevent dust inhalation during processing.

Language

English

Regulation

GHS/CLP

Revision Date

1 March 2011

Request This SDS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Safety Information

Key safety data extracted from the official Safety Data Sheet

Key Hazards

  • May cause respiratory irritation if dust is inhaled
  • May cause eye irritation upon contact
  • May cause skin irritation with prolonged or repeated exposure
  • Harmful if swallowed in large quantities

First Aid Quick Guide

Eye Contact

Rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.

Skin Contact

Wash affected area with soap and water. Remove contaminated clothing. Seek medical advice if irritation develops.

Inhalation

Move to fresh air immediately. If breathing difficulty occurs, seek medical attention. Do not return to work environment if symptoms persist.

Ingestion

Rinse mouth. Do not induce vomiting. Drink water if conscious. Seek immediate medical attention.

Protection Needed

Respiratory

Wear dust mask or respiratory protection (NIOSH-approved) when dust is generated during handling

Hands

Wear appropriate gloves (latex, nitrile, or similar material) when handling material

Eyes

Safety glasses or chemical splash goggles to prevent dust contact

Skin/Body

Wear protective clothing to prevent dust exposure. Long sleeves recommended for extended handling.

Physical Properties

AppearanceWhite to off-white powder or granules
OdorOdorless or nearly odorless
pHNot applicable (polymer solid)
Flash PointNot applicable
Boiling PointNot applicable

Safe Handling

Handling Precautions
  • Use in well-ventilated areas or wear appropriate respiratory protection
  • Avoid breathing dust during handling and processing
  • Avoid contact with eyes and skin
  • Keep container tightly closed when not in use
  • Handle material with care to minimize dust generation
Storage

Store in original, tightly closed container in a cool, dry place away from direct sunlight and moisture. Maintain storage temperature below 25°C. Keep away from incompatible materials.

Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.

Manage All Your Safety Data Sheets with Sevron

Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.

2.5M+
Safety Data Sheets
Access our comprehensive database
AI-Powered
Auto Updates
Never miss a revision again
100%
Compliance Ready
Meet regulatory requirements

Manage safety with confidence – supported by Sevron

FIND OUT MORE