Epigrip M902 Winterfast Hi-Build Brushing Aluminium - Additive
Leighs Paints
A solvent-based aluminium additive coating product containing xylene and other organic solvents. Flammable liquid with harmful vapors that may cause respiratory irritation, skin sensitization, and narcotic effects at high concentrations. Harmful to aquatic organisms and requires proper ventilation and protective equipment during handling.
Hazard Pictograms
ghs02
ghs08
ghs07
ghs10-aa11330-20-7,95-63-6,64742-95-6,107-98-2,103-65-1
English
GHS/CLP
4 August 2010
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- Flammable liquid with low flash point of 30°C
- Harmful by inhalation and through skin contact
- Irritating to skin and eyes
- Vapors may cause headache, dizziness, fatigue and nausea at elevated concentrations
- Toxic to aquatic life and causes long-term environmental harm
First Aid Quick Guide
Remove contact lenses if present. Flush eyes with water or eyewash solution for at least 10 minutes. Seek medical attention if discomfort continues.
Remove contaminated clothing immediately. Wash affected area thoroughly with water. Seek medical advice if irritation or sensitization develops.
Move victim to fresh air immediately. Keep warm and at rest. Provide oxygen or artificial respiration if breathing difficulty occurs. Seek prompt medical attention.
Do not induce vomiting. Keep head low if vomiting occurs to prevent stomach contents entering lungs. Seek immediate medical attention.
Protection Needed
Full face mask with organic gas cartridge if vapor concentrations exceed acceptable levels. Air-supplied respirator required in inadequately ventilated spaces.
Suitable gloves (material to be determined with glove supplier based on breakthrough time); frequent changes recommended as liquid may penetrate gloves.
Splash-proof safety goggles or face shield to prevent direct contact with liquid or spray.
Protective clothing to prevent skin contact, including long sleeves and appropriate work clothing. Take precautions against static discharge.
Physical Properties
Safe Handling
- Use only in well-ventilated areas or with adequate extraction to prevent vapor buildup
- Eliminate all ignition sources - no smoking, sparks or open flames
- Avoid skin and eye contact; use appropriate protective equipment
- Use non-sparking tools and explosion-proof electrical equipment
- Do not use pressure to empty containers; store in original sealed containers
Store in closed original containers at temperatures between 5°C and 25°C in cool, well-ventilated areas away from heat, flames, sparks and oxidizing agents. Keep containers upright and properly sealed to prevent leakage.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.