EA 9309.3NA PART A 50G E-Z PAK
Henkel Limited
EA 9309.3NA Part A is a pink epoxy adhesive resin from Henkel used as part of a two-component epoxy system. The product is irritating to skin and eyes, may cause skin sensitization, and is toxic to aquatic organisms. Proper ventilation and appropriate personal protective equipment are essential during handling and application.
25068-38-6,25085-99-8
English
OSHA
17 July 2008
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- Irritating to eyes and skin
- May cause sensitization by skin contact
- Toxic to aquatic organisms with potential long-term environmental effects
- Hazardous decomposition products released when exposed to heat
First Aid Quick Guide
Wash with plenty of water immediately and continue for several minutes while holding eyelid open. Consult a doctor.
Rinse thoroughly with running water and soap. Apply replenishing cream and change contaminated clothing. See a dermatologist if irritation persists.
Move to fresh air. Consult a doctor if symptoms persist.
Rinse mouth and drink 1-2 glasses of water. Do not induce vomiting. Consult a doctor immediately.
Protection Needed
Use breathing mask or suitable respiratory protection (Filter Type A) when ventilation is inadequate or fumes are generated.
Wear butyl rubber or nitrile rubber gloves. Note that chemical resistance may be reduced at elevated temperatures; inspect regularly for wear.
Wear tightly sealed safety goggles or protective eyewear.
Wear protective clothing and apron to prevent splashing. Use solvent-resistant skin protection cream. Wash before breaks and after work.
Physical Properties
Safe Handling
- Ensure adequate ventilation or use local suction extraction when product is heated
- Do not spray against flames or ignition sources. Keep away from heat and smoking
- Avoid mixing Part A and Part B (curing agent) unless ready to use immediately to prevent dangerous exothermic reactions
- Avoid skin and eye contact during handling
- Use appropriate personal protective equipment as detailed in Section 8
Store in a cool, dry place in original containers with spill collection facilities. Keep away from heat and direct sunlight. Ensure storage areas are adequately ventilated and protect against contamination.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.