DIP Spectrum Red Ceramic Ink
Diptech
DIP Spectrum Red Ceramic Ink is a suspension-type ceramic ink formulated for digital printing applications. The product contains solvents and glass frit components and presents primarily as an eye irritant. Proper handling procedures, eye protection, and adequate ventilation are essential when working with this material.
CAS number: 112-34-5,CAS number: 65997-18-4,CAS number: 108-94-1,CAS number: 64742-95-6
English
GHS/CLP
1 January 1
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Warning- Irritating to eyes upon contact
- Harmful if inhaled in excessive amounts
- Flammable liquid with flash point at 75°C
- May cause upper respiratory tract irritation with prolonged inhalation
- Contains components that may cause drowsiness with extended skin contact
First Aid Quick Guide
Rinse immediately with water. Remove contact lenses if present and continue rinsing. Seek medical attention if irritation persists.
Wash off immediately with plenty of water. Remove contaminated clothing. Get medical attention if irritation develops.
Move to fresh air immediately. If breathing is difficult, provide oxygen. For respiratory cessation, give artificial respiration. Seek medical attention.
Call physician immediately. Do not induce vomiting unless directed by medical personnel. Never give anything by mouth to an unconscious person.
Protection Needed
Use suitable certified respirator when ventilation is inadequate or when exposure to vapors or mists occurs.
Wear protective disposable gloves to prevent skin exposure.
Wear protective safety glasses or chemical goggles.
Wear long-sleeved protective clothing to minimize skin contact.
Physical Properties
Safe Handling
- Avoid contact with skin and eyes
- Prevent inhalation of vapors or mists
- Wash thoroughly with soap and water after handling
- Do not eat, drink, or smoke in work areas
- Keep away from heat, sparks, and open flames
- Maintain good hygiene; remove contaminated clothing before eating or entering break areas
Store in tightly closed containers away from heat, sparks, and open flames. Maintain storage in a dry, cool, well-ventilated location. Use carbon steel, stainless steel, PH-HD, or Teflon containers. Avoid static discharge and do not store with oxidizing materials.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.