DINORAM S / S 311 / SB / SM
Ceca SA ARKEMA
Dinoram S/S 311/SB/SM is an alkyldiamine-based industrial additive primarily used as a track lubricant and adhesion agent in road construction and asphalt emulsions. This corrosive substance poses severe hazards to skin and eyes and is harmful if swallowed, with long-term organ damage risks from repeated exposure. Handle in well-ventilated areas with appropriate personal protective equipment.
Hazard Pictograms
ghs08
ghs10-aa1
ghs05
ghs0761791-55-7
English
GHS/CLP
22 August 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Causes severe skin burns and eye damage on contact
- Harmful if swallowed with potential organ damage
- Causes damage to organs through prolonged or repeated exposure
- Very toxic to aquatic life with long-lasting environmental effects
- May cause respiratory irritation if mist or dust is generated
First Aid Quick Guide
Immediately flush eyes with plenty of water, then rinse with 0.5% acetic acid solution for at least 15 minutes. Remove contact lenses if present. Consult an ophthalmologist immediately.
Remove contaminated clothing. Wash immediately with plenty of 2% acetic acid solution in water, then with soap and water. Keep under medical surveillance and hospitalize immediately.
Move to fresh air immediately. Provide oxygen or artificial respiration if needed. Hospitalize immediately.
Do not induce vomiting. Rinse mouth and lips with plenty of water if conscious. Hospitalize immediately.
Protection Needed
Wear a respirator if necessary. Use approved filter type AK if spillage occurs or vapor forms. Respiratory protection required in case of dust or mist generation.
Wear heat-insulating gloves and impermeable insulated gloves when handling hot material. Use protective gloves complying with EN 374 standard.
Safety glasses with side-shields conforming to EN166 standard. Eye wash bottle with pure water must be available.
Wear protective suit and protective clothing to prevent contact with skin.
Physical Properties
Safe Handling
- Ensure water supplies and eyewash fountains are available near handling areas
- Prohibit smoking, eating, and drinking in application areas
- Provide adequate ventilation and use a catch tank in a bunded area
- Wear protective equipment including gloves, eye protection, and protective clothing
- Wash hands thoroughly after handling and before eating
Keep container tightly closed in a dry, well-ventilated place away from direct sunlight. Store in stainless steel or steel drums only. Avoid aluminum and copper alloys as packaging materials.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.