Background
Safety Data Sheet

CUPROLITE H 86/1

ALFACHIMICI S.p.A

Cuprolite H 86/1 is a phosphoric acid-based chemical formulation designed for the electronics industry. It is classified as corrosive and causes severe burns to skin and eyes. Proper protective equipment and immediate medical attention are required in case of contact.

Hazard Pictograms

ghs05ghs05
CAS Number

7664-38-2

Language

English

Regulation

GHS/CLP

Revision Date

27 November 2012

Request This SDS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Safety Information

Key safety data extracted from the official Safety Data Sheet

Key Hazards

Warning
  • Causes severe skin burns and eye damage due to corrosive nature
  • Inhalation of mist or vapors can cause respiratory irritation
  • May generate flammable hydrogen gas when in contact with metals or reducing agents
  • Highly corrosive to the mouth, throat, and digestive tract if ingested

First Aid Quick Guide

Eye Contact

Rinse immediately with water for a sufficient length of time while keeping eyelids open. Protect the uninjured eye. Seek immediate medical attention from an ophthalmologist.

Skin Contact

Immediately remove all contaminated clothing. Rinse affected areas with plenty of running water and soap. Wash thoroughly with a shower or bath. Seek immediate medical attention.

Inhalation

Move the casualty to fresh air immediately and keep warm and at rest. Seek medical attention if breathing difficulty occurs.

Ingestion

Do not induce vomiting under any circumstances. Seek immediate medical examination and treatment.

Protection Needed

Respiratory

Not required for normal use. Use respiratory protection if mist or vapors are generated during handling.

Hands

Wear protective gloves that provide comprehensive protection, such as PVC, neoprene, or rubber.

Eyes

Use close-fitting safety goggles; do not use contact lenses or eye shields alone.

Skin/Body

Wear clothing that provides comprehensive protection including cotton, rubber, PVC, or viton materials.

Physical Properties

AppearanceClear solution ranging from colorless to yellow
OdorOdorless
pH~0
Flash PointNot applicable
Boiling Point>100°C

Safe Handling

Handling Precautions
  • Avoid all contact with skin, eyes, and inhalation of vapors and mists
  • Do not use empty containers without proper cleaning
  • Verify absence of incompatible material residuals before transfer operations
  • Change contaminated clothing before entering eating or rest areas
  • Do not eat or drink while handling the product
Storage

Store in adequately ventilated premises away from food, drink, and animal feed. Keep containers tightly closed and in original packaging.

Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.

Manage All Your Safety Data Sheets with Sevron

Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.

2.5M+
Safety Data Sheets
Access our comprehensive database
AI-Powered
Auto Updates
Never miss a revision again
100%
Compliance Ready
Meet regulatory requirements

Manage safety with confidence – supported by Sevron

FIND OUT MORE