Cold Galvanise
CRC Industries UK Ltd.
Cold Galvanise is an extremely flammable zinc-based aerosol paint designed for protective coating applications. The product presents serious fire and eye irritation hazards and is toxic to aquatic environments. Proper ventilation, flame source avoidance, and appropriate personal protective equipment are essential during handling.
Hazard Pictograms
ghs02
ghs07
ghs10-aa1
ghs09-gup115-10-6,7440-66-6,78-93-3,1314-13-2,64742-49-0,64742-82-1,95-63-6,165101-57-5,71-36-3
English
GHS/CLP
10 September 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Extremely flammable aerosol that can ignite from sparks or open flames
- Pressurized container may rupture or explode if exposed to heat above 50°C
- Causes serious eye irritation with potential for persistent discomfort
- Very toxic to aquatic organisms with long-term environmental persistence
- Solvent vapors may cause drowsiness, dizziness, nausea and headaches
First Aid Quick Guide
Rinse cautiously with water for at least several minutes. Remove contact lenses if present and easy to remove, then continue rinsing. Seek medical attention if irritation persists.
Remove contaminated clothing immediately and wash affected areas thoroughly with soap and water. Seek medical advice if skin irritation develops.
Move to fresh air immediately and maintain a comfortable breathing position. Call poison control or a physician if any adverse symptoms develop.
Do not induce vomiting if swallowed. Seek immediate medical advice. Swallowing may cause gastrointestinal disturbances and potential airway involvement.
Protection Needed
Wear air-purifying respirator equipped with organic gas/vapor cartridge (type A or AX) if ventilation is insufficient or when visible mist is generated
Wear suitable chemical-resistant protective gloves such as nitrile or rubber when handling concentrate
Wear safety goggles or full face shield to protect against splashing and spray contact
Wear long-sleeved protective clothing to minimize skin exposure to aerosol spray and vapors
Physical Properties
Safe Handling
- Keep container away from all heat sources, sparks, and open flames at all times
- Use only non-sparking tools and ensure all equipment is properly earthed to prevent static discharge
- Ensure strong continuous ventilation throughout the work area
- Never spray toward open flames or other ignition sources
- Do not pierce or burn the container, even after use is complete
Store in original, sealed container away from direct sunlight and heat. Maintain storage temperature below 50°C. Keep container in a cool, dry location away from incompatible materials, particularly strong oxidizing agents. Protect from physical damage and ensure proper ventilation in storage area.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.