Coe Soft Liquid
GC EUROPE N.V
Coe Soft Liquid is a dental technology auxiliary containing ethyl alcohol, benzyl salicylate, and peppermint oil. It is classified as a highly flammable liquid with low flash point and poses risks of eye irritation and potential allergic skin reactions. Use in well-ventilated areas and avoid exposure to heat and open flames.
Hazard Pictograms
ghs07
ghs02
ghs08118-58-1,64-17-5,8006-90-4
English
GHS/CLP
27 September 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
Danger- Highly flammable liquid and vapour with very low flash point of 16°C
- Causes serious eye irritation requiring immediate rinsing and medical consultation
- May trigger allergic skin reactions with prolonged or repeated contact
- Can cause organ damage with single exposure to significant concentrations
- Toxic to aquatic life with long-lasting environmental effects
First Aid Quick Guide
Rinse eyes carefully with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and consult a doctor immediately.
Wash affected area immediately with water and soap, rinsing thoroughly. Remove contaminated clothing. Seek medical treatment if skin irritation continues.
Move affected person to fresh air immediately and keep quiet. Call for medical assistance. Seek medical attention if breathing difficulties develop.
Rinse mouth with water and drink plenty of water. Do not induce vomiting. Consult a doctor if symptoms persist.
Protection Needed
Suitable respiratory protective device recommended when handling, particularly to prevent inhalation of mist or vapors.
Wear protective gloves; material selection should be verified prior to use as glove resistance varies by manufacturer and material.
Wear tightly sealed safety goggles to prevent direct eye contact with liquid or splashes.
Wear protective clothing to prevent splashing and skin contact with the product.
Physical Properties
Safe Handling
- Ensure adequate workplace ventilation or use local exhaust systems
- Prevent aerosol formation during handling and application
- Keep ignition sources and open flames away from product
- Protect against electrostatic charges during storage and transfer
- Avoid all direct contact with eyes and skin
Store in a cool, dry location in sealed, unopened original containers. Protect from heat and direct sunlight. Keep away from foodstuffs. Store in a cool place with good ventilation.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.