BITZER BSE32 Oil
CPI Corporation Pty Ltd
BITZER BSE32 Oil is a synthetic polyol ester refrigeration compressor lubricant classified as non-hazardous under Australian standards. While low-risk for normal handling, the product may cause irritation with prolonged skin contact and mild eye irritation, requiring basic precautions during use and storage.
English
GHS/CLP
1 January 2014
Request This SDS
Safety Information
Key safety data extracted from the official Safety Data Sheet
Key Hazards
- May cause skin irritation and dermatitis with repeated or prolonged contact
- Can cause mild eye irritation and redness if in direct contact
- May cause respiratory irritation if oil mist is inhaled in poorly ventilated areas
- Combustible liquid that requires separation from heat and ignition sources
First Aid Quick Guide
Rinse thoroughly with clean water. Seek medical attention if irritation and soreness persist.
Wash exposed areas with soap and water. Remove contaminated clothing. Seek medical attention if product gets under the skin.
Move to fresh air immediately. Seek medical attention if oil mist is inhaled or respiratory irritation occurs.
Do not induce vomiting. Rinse mouth immediately with water and seek medical attention.
Protection Needed
Use approved respirator with organic vapour and particulate filters if oil mist is generated in poorly ventilated areas or if exposure standards are exceeded.
Protective gloves not normally required, but impervious gloves such as nitrile, viton, or neoprene are recommended if regular contact is anticipated.
Safety glasses or goggles with side shields are recommended.
No skin protection ordinarily required under normal conditions. Use a chemical-resistant apron if needed to prevent direct contact during handling.
Physical Properties
Safe Handling
- Avoid direct contact with skin and eyes
- Use good personal hygiene and wash hands frequently
- Ensure good ventilation to prevent oil mist accumulation
- Never cut, weld, heat, or drill containers
- Keep containers tightly sealed and away from ignition sources
Store in original sealed containers in a cool, dry, well-ventilated area away from direct sunlight and heat. Storage under dry nitrogen is recommended due to the product's hygroscopic nature. Keep away from strong oxidizers, strong acids, and strong bases.
Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.
Manage All Your Safety Data Sheets with Sevron
Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.