Background
Safety Data Sheet

23 -7756 FK

FERRO SPAIN, S.A

FK 7756 is a yellow ceramic enamel stain powder containing inorganic pigments and silicatic materials used for ceramic coatings and decorative preparations. The primary concern is prolonged inhalation of fine quartz dust (5-7% concentration) which may cause silicosis when workplace exposure limits are exceeded. Proper ventilation and dust avoidance are essential for safe handling.

CAS Number

14808-60-7

Language

English

Regulation

CHIP, 67/548/EEC

Revision Date

28 June 2010

Request This SDS

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Safety Information

Key safety data extracted from the official Safety Data Sheet

Key Hazards

  • Prolonged inhalation of quartz dust may cause silicosis and respiratory inflammation
  • May cause eye and skin irritation, particularly with exposure to dust
  • Increased lung cancer risk in individuals already suffering from silicosis
  • Powder can cause localized skin irritation in skin folds or under tight clothing

First Aid Quick Guide

Eye Contact

Immediately flush eyes with plenty of water.

Skin Contact

Wash with water and soap as a precaution.

Inhalation

Move affected persons to fresh air immediately.

Ingestion

If symptoms persist, contact a physician.

Protection Needed

Respiratory

Dust mask with P1 particle filter when respirable dust occurs during handling.

Hands

Nitrile-butadiene rubber (NBR) gloves recommended for handling.

Eyes

Basket-shaped safety glasses or safety goggles with side-shields.

Skin/Body

Safety shoes and protective clothing to minimize exposure to dust.

Physical Properties

AppearanceYellow powder
OdorOdorless
pHNot available
Flash PointNot applicable
Boiling PointNot applicable

Safe Handling

Handling Precautions
  • Ensure good room ventilation to minimize dust exposure
  • Avoid dust generation during handling and use
  • Do not breathe dust - use appropriate respiratory protection if needed
  • Keep containers tightly closed when not in use
  • Use correct handling procedures to prevent unnecessary dust production
Storage

Store in original containers under normal conditions. No special storage requirements. Store away from areas where dust generation may occur and ensure proper ventilation in storage areas.

Disclaimer: The information displayed on this page is derived from the manufacturer's Safety Data Sheet. Always refer to the official SDS document for complete and up-to-date safety information. Sevron is not responsible for any inaccuracies in the displayed data.

Manage All Your Safety Data Sheets with Sevron

Stop chasing outdated documents. Get instant access, automatic updates, and complete compliance visibility.

2.5M+
Safety Data Sheets
Access our comprehensive database
AI-Powered
Auto Updates
Never miss a revision again
100%
Compliance Ready
Meet regulatory requirements

Manage safety with confidence – supported by Sevron

FIND OUT MORE